Send Message
Home > products > 5G Wireless Router >
MTK7621A 5G CPE Router Wifi 6 1800Mbps Dual Bands Gigabit Ports High Speed

MTK7621A 5G CPE Router Wifi 6 1800Mbps Dual Bands Gigabit Ports High Speed

MTK7621A 5G CPE Router

High Speed 5G CPE Router

5G CPE Wifi 6 Router

Place of Origin:

China

Brand Name:

Blank

Certification:

FCC CE CCC

Model Number:

Z2102-S

Contact Us

Request A Quote
Product Details
Processor:
MT7621A MIPS Dual Core CPU, 880MHZ Main Frequency
WIFI Chip:
MT7905D+MT7975D IEEE 802.11n/g/b/a/ac/ax, High Speed Up To 1800Mbps
Ram:
DDR3 256MB
Flash:
NAND FLASH(Reserved Design) Nor Flash 16MB
Ethernet Port:
1*WAN And 3*LAN, Gigabit Ports
Button:
Reset Button* 1,MESH Button*1
SIM Card Slot:
1 Drawer Type SIM Interface, Standard SIM Card (large Card)
Antennas:
2* 2.4G+5G Mobile FRP Antennas; 6 * 5G Mobile FRP Antennas
Product Description

Brief overview

Z2102AX is a 5G+WIFI6 household CPE product. It accesses the Internet through 5G dial-up, and shares the Internet through wireless WiFi 6 and 1000Mbps wired LAN.

 

Main Features of the Product

  • MT7621A scheme, MIPS dual core CPU, main frequency up to 880MHz
  • Independent WIFI6 chips, MT7905D and MT7975D, with a speed up to 1800Mbps
  • The 2.4G rate is up to 573.5Mbps, and the 5.8G rate is up to 1201Mbps, collectively referred to as 1800 Mbps
  • Support MU-MIMO, and WIFI modulation mode supports 1024-QAM and OFDMA
  • High speed 256MB DDR3 with 16MB Nor Flash storage
  • 1WAN and 3LAN, 1000M self-adaptive network interface, supporting automatic flipping (Auto MDI/MDIX),
  • Built in 5G module shares 5G network to routing SOC system through 1000M network interface
  • External standard SIM card (large card) interface, supporting SIM/USIM card
  • With the hardware watchdog function, it can automatically restart in the extreme case of a crash
  • When multiple products are used at the same time, MESH automatic networking is supported
    4 Hardware

Interface

Ethernet Port 3*LAN ports, 1000Mbps supports automatic rollover (Auto MDI/MDIX), conforming to IEEE 802.3/802.3u/802.ab
1*WAN, 1000Mbps supports automatic rollover (Auto MDI/MDIX) in accordance with IEEE 802.3/802.3u/802.ab
Button Reset button* 1,MESH button*1
SIM card slot 1 drawer type SIM interface, standard SIM card (large card)
USB slot USB 2.0 port*1
DC button DC5.5*2.1MM port
antennas 2* non detachable 2.4G+5G mobile FRP antennas
6 *non detachable 5G mobile FRP antennas

 

Introduction to Indicator Functions

S1 LED Data communication indicator between 5G module and routing SOC
LAN1 LED The Internet port is always on and flashes when there is data communication
LAN2 LED The Internet port is always on and flashes when there is data communication
LAN3 LED The Internet port is always on and flashes when there is data communication
WAN LED The Internet port is always on and flashes when there is data communication
Power LED It is always on when the power supply is connected, but not on when the power supply is faulty or not connected
2.4G WIFI LED It is always on when the 2.4G WIFI function is turned on, flashes when there is data communication, and does not light when the 2.4G WIFI function is not turned on or when the 2.4G WIFI function is faulty
5.8G WIFI LED It is always on when the 5.8G WIFI function is turned on, flashes when there is data communication, and does not light when the 5.8G WIFI function is not turned on or when the 5.8G WIFI function is faulty
5G LED It is always on when the routing system identifies and successfully attaches the 5G mobile communication module, and it is not on when the 5G mobile communication module fails or is not connected to the 5G mobile communication module
Internet LED The device dials successfully through the 5G mobile communication module or WAN port. It is always on when communicating with the Internet normally, but not when the device cannot access the Internet

Hardware platform introduction

Processor MT7621A MIPS Dual Core CPU,880MHZ main frequency
WIFI Chip MT7905D+MT7975D IEEE 802.11n/g/b/a/ac/ax, high speed up to 1800Mbps
Ram DDR3 256MB
Flash NAND FLASH(Reserved design)
Nor Flash 16MB

Introduction to watchdog function

When the routing system operates normally, but only the 4G/5G module dials abnormally, the routing system can control the power supply of the 4G/5G module through GPIO to automatically restart the 4G/5G module to repair the dialing exception.

When the system operates abnormally, the hardware watchdog function will restart the whole system.

5G module interface description

This product has a built-in 5G module. After the 5G module dials up to the Internet, it is converted into a 1000M network interface through the RGMII bus of the 5G module, and then connected to the routing SOC network interface to share the 5G network. In this way, the high-speed 5G network can be shared to the routing SOC to the maximum extent, and will not be limited by the USB3.0 data bus of the routing SOC, so that the 5G high-speed network cannot be fully used.

 

 

MTK7621A 5G CPE Router Wifi 6 1800Mbps Dual Bands Gigabit Ports High Speed 0MTK7621A 5G CPE Router Wifi 6 1800Mbps Dual Bands Gigabit Ports High Speed 1

Send your inquiry directly to us

Privacy Policy China Good Quality 5G Wireless Router Supplier. Copyright © 2019-2023 zbtlink.com . All Rights Reserved.