Place of Origin:
China
Brand Name:
Blank
Certification:
FCC CE CCC
Model Number:
Z6001AX-M.2-H
Contact Us
Brief Introduction
Z6001AX-M2-H is a 5g + WiFi 6 outdoor CPE product. It accesses the Internet through 5G and Gigabit WAN port dial-up, and then shares the Internet network through wireless WiFi 6 and Gigabit wired LAN.
Ethernet Port | 1*LAN, 1000Mbps (Support Auto MDI/MDIX), IEEE 802.3/ 802.3u/ 802.ab |
Power port | Standard POE |
Buttons | 1*Reset and 1*MESH |
SIM card slot | 1*Standard SIM card Slot, Support SIM/USIM |
Antennas | 2*Undetachable 2.4G+5G fiberglass antennas |
2*Undetachable 5.8G+5G fiberglass antennas | |
M.2 interface | Built-in M.2*1, Support USB3.0 and PCIE Bus, support 5G module |
Main Chip | IPQ6000 Quad-core ARM Cortex A53s CPU, 1.2GHZ main frequency |
2.4G WIFI chip | QCN5022 IEEE 802.11ax/n/g/b,up to 573.5Mbps, 2T2R |
5.8G WIFI chip | QCN5052 IEEE 802.11ax/ac/a,up to 1201Mbps, 2T2R |
RAM | DDR3 256MB (One DDR matches 32bit firmware) |
Flash | 128MB NAND FLASH |
Power LED | It is always on when power supply is connected, but not on when power supply is faulty or not connected |
SYS LED | 1.Red color when startup,green color or off after boot 2.Press Mesh button,ready for Mesh pairing, green light flash per seconds,other indicators not work 3.The network of the main device is normal,Green and blue lights go on at the same time(cyan color) 4.The slave device MESH is connected successfully, when it’s little far away,green and red lights go on(orange),green and blue lights go on when proper distance(cyan) |
5G LED | The light is always on when the routing system identifies and successfully mounts the mobile communication module, and is not on when the mobile communication module is faulty or not connected to the 5G mobile communication module |
WAN LED | When connected to the network, it is always on and blinks when there is data communication, the port has LED |
LAN1 LED | When connected to the network, it is always on and blinks when there is data communication, the port has LED |
LAN2 LED | When connected to the network, it is always on and blinks when there is data communication, the port has LED |
LAN3 LED | When connected to the network, it is always on and blinks when there is data communication, the port has LED |
When the routing system runs normally, but the 5g module dialing is abnormal, the routing system will control the power supply of the 5g module through GPIO to restart the 5g module automatically to repair the 5g dialing abnormality
When the system moves abnormally, the watchdog function of ipq6000 will restart the whole system.
This product built-in M.2 interface, which can be used to expand 5G mobile communication function. M.2 interface supports USB3.0 and PCIe bus. Whether 5g mobile communication supports NSA or SA and frequency bands is determined by the selected 5G module.
Send your inquiry directly to us