Place of Origin:
China
Brand Name:
Blank
Certification:
FCC CE CCC
Model Number:
Z2101AX
Contact Us
Brief overview
Z2101AX is a 5G/4G+WIFI6 home CPE router. It accesses the Internet through 5G/4G mobile communication dial-up or 1000Mbps WAN port, and then shares the Internet network through wireless WiFi 6 and 1000Mbps wired LAN.
Main features of the product
Introduction to the hardware interface
Processor | MT7621A MIPS Dual Core CPU, 880MHZ main frequency |
WIFI chipset | MT7905D+MT7975D IEEE 802.11n/g/b/a/ac/ax, max speed up to 1800Mbps |
RAM | DDR3 256MB |
Flash | Nor Flash 16MB |
NAND Flash |
Ports |
WAN* 1, 1000Mbps(Auto MDI/MDIX) IEEE 802.3/802.3u/802.ab |
LAN*3, 1000Mbps(Auto MDI/MDIX) IEEE 802.3/802.3u/802.ab |
|
SIM slot | Spring type SIM slot*1, QFN-8(6mmx5mm) eSIM*1, Support SIM/USIM |
Power adapter | DC5.0*2.1MM slot |
Button | Reset button* 1, MESH button*1 |
Antennas | Onmidirectional External 5dbi 2.4G antennas*2 |
Onmidirectional External 5dbi 5.8G antennas*2 | |
Onmidirectional External 5dbi 5G/4G antennas(5G antennas* 4, 4G antennas*2) |
MESH LED |
1. The red light is on during the boot process, the boot is complete, the red light is off and the green light is on 2. Press the mesh button to enter the mesh pairing state, the green light flashes once a second, and the other lights are off 3. The main equipment network is normal, the green light and blue light are on at the same time (cyan) The slave device MESH is successfully connected, and the distance is longer, the green light and the red light are on at the same time (orange), the distance is suitable for the green light and the blue light is on at the same time (cyan) |
||
WAN LED | When connecting the WAN ports, the LED light will be always on, and the LED will be flashing when there is data communication | ||
LAN1 LED | When connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication | ||
LAN2 LED | When connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication | ||
LAN3 LED | When connecting the LAN ports, the LED light will be always on, and the LED will be flashing when there is data communication | ||
4G/5G LED | When insert SIM card, the LED light will be always on, and the LED will be flashing when there is data communication | ||
POWR LED | when the power supply is normal, the power indicator is always on, and it won’t be on when the power supply is abnormal. |
This hardware product is designed with a hardware watchdog function. The hardware watchdog will automatically turn on after power-on, and detect the heartbeat level output by the routing system that jumps once per second. If the routing system itself fails (such as a crash), it will also Naturally, the heartbeat level can no longer be output. At this time, if the hardware watchdog does not detect the heartbeat level within 120 seconds, it will shut down itself for 15 seconds and then restart the entire system.
When the routing system is operating normally, but the 5G/4G module dialing is abnormal, the routing system will control the power supply of the 5G/4G module through GPIO and let the module automatically restart to fix the 5G/4G dialing abnormal problem.
Send your inquiry directly to us