|Chipset:||MT7621A MIPS Dual-Core CPU, 880MHZ Main Frequency||Ram:||DDR3 256MB|
|Flash:||Nor Flash 16MB||Color:||Black|
|Wi-fi Transmission Standard:||802.11ax||Ports:||1*WAN Port+3*LAN Ports (Auto MDI/MDIX) IEEE 802.3/802.3u/802.ab|
|Power Adapter:||12V 1A||Product Name:||Gigabit Dual Band Openwrt Wifi6 Router|
Dual Band Openwrt Wifi6 Router,
MT7621A MIPS WIFI6 Router,
DDR3 256MB Wireless Gigabit Router
This document describes the electrical characteristics, RF performance, dimensions and application environment of z100ax. Under the introduction of this document, end users or developers can quickly understand the hardware functions of z100ax. Z100ax is a WiFi 6 home router, which can access the Internet through WAN port, and then share the Internet through wireless WiFi 6 and 1000Mbps wired LAN.
Relevant standards and specifications:
1*1000M WAN Port (Auto MDI/MDIX)
3* 1000M LAN Ports(Auto MDI/MDIX)
|DC port||DC5.0*2.1MM interface|
|Button||1* Reset button|
|antennas||2* omnidirectional 5dBi 2.4G antennas, external|
|2* omnidirectional 5dBi 5.8G antennas, external|
1. the red light is on during the start-up process, and the start-up is completed, and the red light is off and the green light is on
2. press mesh to enter mesh pairing state. The green light flashes once a second, and other lights are not on
3. the main equipment network is normal, and the green light and blue light are on simultaneously (blue)
The connection from the device mesh is successful, the distance is far from the green light, the red light is on (Orange), and the distance is suitable for the green light and the blue light is on simultaneously (blue)
|Processor||MT7621A MIPS Dual-Core CPU, 880MHZ Main Frequency|
|WIFI chipset||MT7905D+MT7975D IEEE 802.11n/g/b/a/ac/ax,High speed up to 1800Mbps|
|Frash||Nor Flash 16MB|
|Don’t support NAND Flash|
|Test conditions||minimum value||Rated Value||Maximum Value|
|working voltage||T A = 25°C||6V||12V||14V|
|Absolute working voltage||T A = 25°C||5.5V||16V|
|Working current||VIN=12V, T A = 25°C||0.6A||0.8A||1A|
1. Do you provide customer LOGO?
Yes, we can provide customer LOGO on firmware and hardware.
2. Do you accept PCBA orders only?
Of course, as a OEM/ODM manufacturer, we can provide PCBA in a short time with good quality.
3. Do you provide firmware customization?
Sure thing, unlike other companies which are buying solutions from design company, we have our own firmware development team to
4. Do you....?
Maybe, why don't contact us now! Inquring us to see if we can, or if we do, to see if we can suprise you!