Place of Origin:
China
Brand Name:
OEM
Certification:
CE FCC
Model Number:
WD523
Contact Us
Industrial 4G LTE Modem LTE Wireless Router 2.4G WiFi 1 WAN 1 LAN Industrial Grade OpenWRT System Metal Enclosure
Simply Introduction:
WD523 is an industrial DTU with 4G function, supports transparent data transmission, access to the Internet through 4G mobile communication dial-up or 100Mbps WAN port dial-up, and then share the Internet network through wireless WiFi 4 and 100Mbps wired LAN .
Selling points:
MT7628DA solution, MIPS24KEc architecture CPU, the main frequency is up to 580MHZ
MT7628DA chip integrates 2.4G WIFI function, the rate is up to 300Mbps
MT7628DA chip integrates 64MB DDR2, with 8MB Nor Flash
1WAN, 1LAN full 100M adaptive network ports, support auto flip (Auto MDI/MDIX)
one RS232
one RS485
9-32V power supply
Support "one-key flashing mode", that is, long press the reset button to turn on the machine to enter the rescue flashing mode
Built-in mini-PCIE standard interface, which can be used to connect 4G mobile communication module
External standard SIM card interface, support SIM/USIM card
Supports hardware watchdog function, the device will automatically restart when the routing system or 4G module fails
Specification:
| Network ports |
1 WAN port, 100Mbps support auto flip (Auto MDI/MDIX) Compliant with IEEE 802.3/802.3u |
|
1 LAN port, 100Mbps supports auto flip (Auto MDI/MDIX) Compliant with IEEE 802.3/802.3u |
|
| SIM card slot | SIM card interface 1 standard SIM card (large card) interface, support SIM/USIM |
| Power port | DC5.0*2.1MM |
| Button | 1* reset button |
| Antenna | 2 external 2.4G antennas |
| 2 external 4G mobile communication antennas, compatible with 3G/2G mobile data communication | |
| Connector | 6 PIN connector, this connector is RS232 and RS485 communication interface |
| Power LED | always on when the power is turned on, and it is not on when the power fails or is not connected to the power supply. The left LED lights in the bottom row |
| 2.4G WIFI LED | always on when the 2.4G WIFI function is turned on, flashes when there is data communication, and it is not on when the 2.4G WIFI is not turned on or when the 2.4G WIFI function is faulty, the right LED lights in the lower row |
| Mobile 4G LED | This LED light is controlled by the routing system, it is recognized that the 4G module is always on, the 4G module is faulty or there is no 4G module, the LED light does not light up, the left LED light in the upper row |
| External network LED light | The device dials successfully through the 4G mobile communication module or the WAN port. It is always on when it communicates with the Internet normally, and it does not turn on when the device cannot access the Internet. The upper row of left LED lights |
Send your inquiry directly to us
