Place of Origin:
China
Brand Name:
ZBT
Model Number:
ZBT-WG1602
Contact Us
Ethernet interface |
1* Wan port, 1000Mbps, Support Auto MDI/MDIX Protocol: IEEE 802.3/802.3u/802.ab |
4* Lan ports, 1000Mbps, Support Auto MDI/MDIX Protocol: IEEE 802.3/802.3u/802.ab |
|
USB interface | 1* USB2.0 slot (Note: USB slot can't work with the second 4G module at the same time) |
TF Card interface | 1* Standard TF card interface |
SIM Card Slot | 2*Nano SIM Card, Support SIM/USIM |
Power interface | DC5.0*2.1MM port |
Button | 1*reset button |
Antennas | 2*omnidirectional 5dbi 2.4G & 5.8G dual-band antennas |
4*omnidirectional 5dbi 4G antennas, compatible with 3G/2G | |
PCIe interface | Built-in 2*4G PCIe module interfaces |
WAN LED | The red light will always on when cable be inserted and will flash when it work. |
LAN1-4 LED | The red light will always on when cable be inserted and will flash when it work. |
Power LED | Power light is always on when it work. |
2.4G WIFI LED |
Light is always on when the 2.4G WIFI work.and flash during data communication. Light is off when the 2.4G WIFI function is off or the 2.4G WIFI function fails. |
5.8G WIFI LED |
Light is always on when the 5.8G WIFI work.and flash during data communication. Light is off when the 5.8G WIFI function is off or the 5.8G WIFI function fails. |
4G1-2 LED | The routing system is always on when the 4G module 1/2 is successfully mounted, but not on when the 4G module 1/2 is not connected or the 4G module 1/2 fails |
Processor | MT7621A MIPS dual-core CPU, 880MHZ main frequency |
2.4G WIFI Chipset | MT7603EN IEEE 802.11n/g/b, Maximum speed 300Mbps |
5.8G WIFI Chip | MT7612EN IEEE 802.11ac/a, Maximum rate 867Mbps |
Ram | DDR3 256MB |
Flash | Nor Flash 16MB |
This product has two built-in PCIe interfaces of USB2.0 bus, which can be used to expand the function of 4G mobile communication. The frequency bands depends on the 4G modules.
As shown in the "Product Picture" , two 4G modules are each corresponds to two SIM cards. In this way, a dual-module & dual-SIM card can achieve traffic superstition or 4G network backup through software control.
FAQ
Do you provide customer LOGO?
Yes, we can provide customer LOGO on firmware and hardware.
Do you accept PCBA orders only?
Of course, as a OEM/ODM manufacturer, we can provide PCBA in a short time with good quality.
Do you provide firmware customization?
Sure thing, unlike other companies which are buying solutions from design company, we have our own firmware development team to
Do you....?
Maybe, why don't contact us now! Inquring us to see if we can, or if we do, to see if we can suprise you!
Send your inquiry directly to us