Place of Origin:
MESH routing system ZBT-L6 is a Gigabit dual-band home wireless networking set. Each node has a 10/100/1000Mbps WAN/LAN adaptive port, a 10/100/1000Mbps adaptive LAN port, and a wireless transmission rate of 1167Mbps.
|Product Name||Gigabit Ethernet Port Mesh Router||Remark|
|Product Type||LAN uplink (compatible with WIFI uplink) device|
|WAN||1*10/100/1000M Auto MDI/MDIX WAN /LAN Port|
|LAN||1*10/100/1000M Auto MDI/MDIX LAN Port|
|WLAN||2.4G 300Mbps,5G 867Mbps|
|LED||1*Integrated indicator||(Red, Green, Yellow)|
|Wireless Protocol||802.11b/g/n 2.4GHz; 802.11ac/a/n 5GHz.|
|MESH networking standard||802.11s|
|WAN||1*10/100/1000 Base-T Interface,IEEE802.3/802.3u,Support full-duplex / half-duplex flow control.|
|LAN||1*10/100/1000 Base-T Interface,IEEE802.3/802.3u,Support full-duplex / half-duplex flow control.|
1*Power Interface, The router is powered by an external power adapter. The external power adapter should:
1. Meet the EMC requirements of YD/T 983 and pass CCC certification;
2. Input voltage: 198-242V ~ 50Hz;
3. Output voltage DC: 12V ± 5%, ripple range ± 200mV, output current: 1A;
4. The MTBF time of the power supply is: greater than 30,000 hours;
5. The power supply interface of the device itself and the DC output interface of the power adapter should be a unified international standard circular interface with a DC head diameter of 2.1 mm;
6. The adapter's DC output power cord can be optionally equipped with an EMI absorption magnetic ring;
7. Under normal conditions, the insulation resistance between the metal casing of the equipment and the power line should be not less than 50MΩ.
8, should have lightning protection against surge test, lightning protection level of at least 1.5KV.
802.11b/g/n/ a/ac,2.4GHz/5GHz,Wireless rate 1167Mbps；
2* Internal 3dBi Omnidirectional dual frequency antenna.
The Current wifi Device quantity can highly reach to 40
|Button and LED||Function Description|
|Reset||Press and hold the RST button for 6 seconds, then the indicator light flashes and then releases. The indicator light turns on and the system restarts. The last reply flashes to restore the factory settings.|
Long green light: good connection quality
Long yellow: the connection quality is normal
Red long light: connection failed
Send your inquiry directly to us