Place of Origin:
China
Brand Name:
ZBT
Certification:
FCC/CE
Model Number:
ZBT-L1
Contact Us
MESH Routing System ZBT-L1 is a dual-band home wireless networking suite. Each node has a 10/100Mbps WAN/LAN adaptive port, a 10/100Mbps adaptive LAN port, and a wireless transmission rate of 1167Mbps.
Product name | 10/100M Ethernet Port Mesh Router | Remark | |
Type | LAN uplink (compatible with WIFI uplink) device | ||
Model | ZBT-L1 | ||
WAN Port | 1*10/100M Auto MDI/MDIX WAN /LAN Port | ||
LAN Port | 1*10/100M Auto MDI/MDIX LAN Port | ||
WLAN | 2.4G 300Mbps,5G 867Mbps | ||
Hardware | Main Chipset | RTL8197FNT-VE4-CG | |
Main Rate | 600MHz | ||
FLASH | 8MByte | SOP8 | |
RAM | 64MByte | ||
Adapter | 9V1A | ||
LED | 1*Integrated indicator | (Red,Green,Yellow) | |
Buttom | Reset | ||
Antenna | 2*3dBi | internal antenna | |
Wireless Rate | 1167Mbps | ||
Wireless Protocol | 802.11b/g/n 2.4GHz; 802.11ac/a/n 5GHz | ||
Wired Protocol | 802.3;802.3u | ||
MESH networking standard | 802.11s | ||
Roaming standard | 802.11v/r |
Type | Demand item | Specification |
Wire Interface | WAN Port | 1*10/100 Base-T Interface,IEEE802.3/802.3u Protocol, Support full-duplex / half-duplex flow control. |
LAN Port | 1*10/100 Base-T Interface,IEEE802.3/802.3u Protocol,Support full-duplex / half-duplex flow control. | |
Adapter |
1*DC Port,the router is powered by an external power adapter. External power adapter should: 1. Meet the EMC requirements of YD/T 983 and pass CCC certification; 2. Input voltage: 198V-242V ~ 50Hz; 3. Output voltage DC: 9V ± 5%, ripple range ± 100mV, output current: 1A; 4. The MTBF time of the power supply is: greater than 30,000 hours; 5. The power interface of the device itself and the DC output interface of the power adapter should be a unified international standard circular interface, and the DC head diameter is 2.1mm; 6. The adapter's DC output power cord can be optionally equipped with an EMI absorption magnetic ring; 7. Under normal conditions, the insulation resistance between the metal casing of the equipment and the power line should be not less than 50MΩ. 8, should have lightning protection against surge test, lightning protection level of at least 1.5KV. |
|
Wireless Port | Wi-Fi Networking |
802.11b/g/n/a/ac;2.4GHz/5GHz,Wireless Rate 1167Mbps. 2* Internal 3dBi Omnidirectional dual frequency antenna. The Current wifi Device quantity can highly reach to 32 |
Button and LED | Function Description |
Reset | Press and hold the RST button for 6 seconds, then the indicator light flashes and then releases. The indicator light turns on and the system restarts. The last reply flashes to restore the factory settings. |
LED |
Long green light: good connection quality Long yellow: the connection quality is normal Red long light: connection failed |
Send your inquiry directly to us