Place of Origin:
MESH Routing System ZBT-L1 is a dual-band home wireless networking suite. Each node has a 10/100Mbps WAN/LAN adaptive port, a 10/100Mbps adaptive LAN port, and a wireless transmission rate of 1167Mbps.
|Wire Interface||WAN Port||1*10/100 Base-T Interface,IEEE802.3/802.3u Protocol, Support full-duplex / half-duplex flow control.|
|LAN Port||1*10/100 Base-T Interface,IEEE802.3/802.3u Protocol,Support full-duplex / half-duplex flow control.|
1*DC Port,the router is powered by an external power adapter. External power adapter should:
1. Meet the EMC requirements of YD/T 983 and pass CCC certification;
2. Input voltage: 198V-242V ~ 50Hz;
3. Output voltage DC: 9V ± 5%, ripple range ± 100mV, output current: 1A;
4. The MTBF time of the power supply is: greater than 30,000 hours;
5. The power interface of the device itself and the DC output interface of the power adapter should be a unified international standard circular interface, and the DC head diameter is 2.1mm;
6. The adapter's DC output power cord can be optionally equipped with an EMI absorption magnetic ring;
7. Under normal conditions, the insulation resistance between the metal casing of the equipment and the power line should be not less than 50MΩ.
8, should have lightning protection against surge test, lightning protection level of at least 1.5KV.
|Wireless Port||Wi-Fi Networking||
802.11b/g/n/a/ac;2.4GHz/5GHz,Wireless Rate 1167Mbps.
2* Internal 3dBi Omnidirectional dual frequency antenna.
The Current wifi Device quantity can highly reach to 32
Can you printing Customer logo on products?
Yes, we can printing your logo on products.
Do you provide PCBA board order only?
Of course, as a OEM/ODM manufacturer, we can provide PCBA in a short time with good quality.
Can you desin products as per customer's requirements?
Yes, of course. We have our own R&D department, we have ability to design and produce at same time.
Maybe, why don't contact us now! Inquring us to see if we can, or if we do, to see if we can suprise you!
Send your inquiry directly to us